手提電腦支架 Laptop 直立支架 Lenovo Thinkpad

將手提電腦直立，適合想用雙屏幕 / 只有laptop 但不想低頭的人。使用後可以升高電腦屏幕底部至離枱面 16-17CM 以上。需要配合外置 Keyboard 及 mouse 使用。 共有三個款 ($35-50), 各有特色： A款 ($50): 最穩陣, 但體積相對較大, 適合固定場景, 長期使用沒有問題 已測試合適的電腦有: Lenovo P53, T480s, T14, ThinkBook 15, Yoga B款 ($35): 穩定性介於 A款各C款之間. 最直, 所以最高, 較適合身型較高人士。同時, 對電腦屏幕的最大開啟角度要求最高 (見圖5) 已測試合適的電腦有: Lenovo T460s, T490s, Acer Chromebook 14, Should fit any thinner 13"/14"/15" notebook C款 ($35): 最輕便攜帶, 但耐用性較其他低 已測試合適的電腦有: 下半厚度 10-20mm 電腦. 實測 Lenovo T460S, T14 都可以 注: 請自行量度電腦屏幕的最大開啟角度, 並與實物圖比較 (圖3-5). A、C 款要 148度以上，B款要接近170度。 另外有第四款支架，最靈活，但價錢會貴很多: https://www.carousell.com.hk/p/1334929549/?utm_campaign=share-own-listing&utm_medium=sharing&utm_source=share-copylink 3D打印，PLA 材質 ，支架會加保護棉、可自訂顏色 可自選顏色：黑 / 白 / 黃 / 橙黃 / 綠 / 青 (Tiffany blue) / 雲石 (+$5) / 夜光綠 (+$8) 自家打印，人手加工打磨，保証可用！不適合完美主義者。 可放工時間金鐘至美孚地鐵站交收，或買家支付平郵/ 順豐到付費用。 更多描述: https://joanneinhk.com/3d-printed-laptop-stand/ 尊重版權。圖樣來自： A款: https://www.printables.com/model/360322-vertical-laptop-stand B款: https://www.printables.com/model/102161-vertical-laptop-stand-for-lenovo-thinkpad-t460s-t4 C款: https://www.printables.com/model/805370-laptop-stand #3D打印 ====== Translation by ChatGPT (subject to the Chinese description) ===== Position the laptop vertically, suitable for those who want to use dual screens or those who only have a laptop but do not want to look down. After use, the bottom of the computer screen can be raised to more than 16-17 cm above the table surface. It needs to be used with an external keyboard and mouse. There are three models available ($35-50), each with its own features: Model A ($50): Most stable, but relatively larger, suitable for fixed settings, and can be used long-term without issues. Tested compatible computers include: Lenovo P53, T480s, T14, ThinkBook 15, Yoga. Model B ($35): Stability is between Model A and Model C. It is the straightest, thus the highest, making it more suitable for taller individuals. It also has the highest requirement for the maximum opening angle of the computer screen (see images 3-5). Tested compatible computers include: Lenovo T460s, T490s, Acer Chromebook 14, should fit any thinner 13"/14"/15" notebook. Model C ($35): The most portable, but durability is lower than the others. Tested compatible computers have a lower thickness of 10-20mm. Lenovo T460S and T14 have been tested and are compatible. Note: Please measure the maximum opening angle of your computer screen and compare it with the actual product images (images 3-5). Models A and C require an angle of over 148 degrees, while Model B requires close to 170 degrees. 3D printed, made of PLA material, customizable colors. Available colors: Black / White / Yellow / Orange Yellow / Green / Tiffany Blue / Marble (+$5) / Glow-in-the-dark Green (+$8). Printed in-house, hand-finished and polished, guaranteed to be usable! Not suitable for perfectionists. Delivery can be arranged from Admiralty to Mei Foo MTR station after work hours, or buyers can pay for standard mail / SF Express cash on delivery. More descriptions can be found at: https://joanneinhk.com/3d-printed-laptop-stand/ Respect copyright. Designs come from: Model A: https://www.printables.com/model/360322-vertical-laptop-stand Model B: https://www.printables.com/model/102161-vertical-laptop-stand-for-lenovo-thinkpad-t460s-t4 Model C: https://www.printables.com/model/805370-laptop-stand